Item #:

Product

Sample Prices

100% Soy

$16.95 -

10 lb.

($1.70 lb.)

Click Here

 Taylored 50/50

(49% Paraffin/

51% Soy Blend)

$15.40-

11 lbs.

($1.40 lb.)

Click Here

(70% Paraffin/

20% Soy Blend

10% Petro.)

 (COMPARED TO THE IGI-6006)

$15.40-

11 lbs.

($1.40 lb.)

$15.40-

11 lbs.

($1.40 lb.)

RobNat 1226 Palm Wax

$14.00 -

10 lb.

($1.40 lb.)

Click Here

Item #:

Product

Sample Prices

RobNat 1230 Palm Wax

$14.00 -

10 lb.

($1.40 lb.)

#2089

 TAYLORED

VOTIVE

GRANULATED

$14.00-

10 lbs.

($1.40 lb.)

Click Here

#2090

 TAYLORED

PILLAR

GRANULATED

$14.00-

10 lbs.

($1.40 lb.)

Click Here

Item #:

Product

MEDIUM DENSITY

$19.99 (1 Gallon)

Approx. 7 lbs.

Click Here

#2084

MEDIUM DENSITY

$75.00 (5 Gallon)

Approx. 35 lbs.

HIGH DENSITY

$19.99 (1 Gallon)

Approx. 7 lbs.

HIGH DENSITY

$79.00 (5 Gallon)

Approx. 35 lbs.

Item #:

Product

#7080

EMULSIFING WAX

$8.00

1 lbs. NF SP-210 P

VYBAR (165)

$4.95

1 lbs.

STERIC ACID

$3.00

1 lbs.

Taylored Contaner #2023

• One-pour container blend wax

• Soft & Creamy Texture

• Excellent Hot & Cold Scent Throw

• Bright Finish & Good Adhesion to Jars

• 6-10% Typical Fragrance Oil Retention (do not go above 12%)

Directions:

Heat wax to approx. 185° F.  Add Fragrance & Dye at approx. 180°.  Pour at approx. 165-170° for best adhesion to jars.  Allow candles to cool slowly (group candles together) to avoid sink holes & "wet spots" in jars.

RobNat 1226 Palm Wax - Container

• One-pour container blend wax

• Comes in bead form

• Good Hot & Cold Scent Throw

• Crystal-like Finish & Good Adhesion to Jars

• 6-10% Typical Fragrance Oil Retention (do not go above 12%)

Directions:

Heat wax to approx. 185° F.  Add Fragrance & Dye at approx. 180°.  Raise Temperature and Pour at approx. 190-195°. For best adhesion to jars (You may wish to pre-heat your containers at a low temperature to allow for a quality finish).  Allow candles to cool slowly (group candles together) to avoid sink holes & "wet spots" in jars.

TAYLORED 30/70 #2023-R

• One-pour container blend wax (in most cases)

• Soft & Creamy Texture, easy to work with

• Excellent Scent Throw

• Excellent Adhesion to Jars (good for layered candles)

• Opaque Finish

• 6-10% Typical Fragrance Oil Retention (do not go above 12%)

Directions:

Heat wax to approx. 185° F.  Add Fragrance & Dye at approx. 180°.  Pour at approx. 160-180°.  Allow candles to cool slowly (group candles together) to avoid sink holes.

Nature Wax - Cargill C-3

Step One: Melting of Wax – The wax should be heated to a temperature of 130^o to 200^o F to melt the wax up.  Do not heat the wax above 200^o F.  If Wax is held at higher temperatures for long periods of time it will discolor.  Always use a thermometer when melting the wax and never leave your heated wax unattended.  While the wax is melting stir the wax regularly to reduce localized heating of the oil.  This will help to reduce burning of the wax while heating.

Step Two: Adding of other ingredients – Other additives or ingredients may be added at any time to help improve the performance of the wax.

 Step Three: Adding Candle Scent and Dye – The Fragrances and Dyes can be added to the wax after the wax is completely liquid.  Make sure to stir the wax completely to ensure that the fragrances and dyes are completely mixed in. *

 Step Four: Preparing the Wax for Pouring - After wax has been completely melted reduce the heat on the wax so that the wax cools to a temperature of 120^o to 165^o F.  This will reduce cracking and discoloration of the wax after it has cooled.

 Step Five: Pouring Candles – Make sure that the container is at room or slightly warmer before pouring the wax into the container.  The wax should be poured in the container while the wax is 120^o to 165^o F to reduce cracking and speed up the cure time of the wax.  If wax is to be left in melter over night the wax should be stored at a temperature of 130^o to 145^o F.

Step Six: Curing of Candles – The candle should be allowed to cool and cure for at least 12 hours before the candle is burned.  This will allow the crystals of the wax completely form giving a nice finish to the candle. * The recommended fragrance load for this wax is 6% or less, although a 7 to 10% fragrance loads may be added with the addition of additives to help control the fragrance.

Taylored 50/50

• One-pour container blend wax

• Soft & Creamy Texture

• Smooth, Flat Top - No Cracking

• Excellent Hot & Cold Scent Throw

• 6-10% Typical Fragrance Oil Retention (do not go above 12%)

Directions:

Heat wax to approx. 185° F.  Add Fragrance & Dye at approx. 180°.  Pour at approx. 160-170° for best adhesion to jars.  Allow candles to cool slowly (group candles together) to avoid sink holes & "wet spots" in jars.

TAYLORED VOTIVE GRANULATED

• Votive Blend Wax

• Nice, Smooth Finish

• Excellent Scent Throw

• Good for small pillars

Directions:

Heat Wax to approx. 170-180°.  Add fragrance and dye.  Pour at approx. 170-180°.  You will need to re-pour once the wax hardens.

TSB - Taylored Special Blend Wax

• Container Blend, Votive & Pillar Blend

• 2 pour wax

• Mottling Finish

• 6-9% Fragrance Load

Directions:

Heat Wax to approx. 170-180°.  Add fragrance and dye.  Pour at approx. 170-180°.  You will need to re-pour once the wax hardens.

Robnat 1230 Palm Wax - Votive & Pillar Blend

• Single Pour Votive & Pillar Blend

• Comes in bead form

• Good Hot & Cold Scent Throw

• Crystal-like Finish

• 6-10% Typical Fragrance Oil Retention (do not go above 12%)

• NOTE: Needs 5% Steric Acid added to this WAX

Directions:

Heat wax to approx. 185° F. Add Steric Acid, then Add Fragrance & Dye at approx. 180°.  Raise Temperature and Pour at approx. 190-195°.